Positional Order and Disorder of Symmetric and Unsymmetric BEDT-STF Salts

The symmetric (s-) and unsymmetric (us-) BEDT-STF (=bis(ethylenedithio)diselenadithia-fulvalene) salts were prepared, and their crystal structures and electrical resistivities were investigated. Four us-BEDT-STF salts have the positional disorder of the Se atoms in the STF framework in crystals, whereas three s-BEDT-STF salts have no disorder. When κ-(us-BEDT-STF)₂GaCl₄ and κ-(cis-s-BEDT-STF)₂GaCl₄ are compared, the latter without the positional disorder of the Se atoms is more conductive than the former one with the disorder.     

Simultaneous determination of sulfamethoxazole and trimethoprim in human plasma by capillary zone electrophoresis

A capillary electrophoretic method for the simultaneous determination of sulfamethoxazole and trimethoprim in plasma was developed. Sulfamethoxazole and trimethoprim extracted from human plasma with ethyl acetate were analyzed at 20 kV and 25 degrees C using 15 mm phosphate buffer (pH 6.2) as the electrolyte. The detection was by UV at 220 nm. The run time was 8.0 min and the limit of quantification was 10.00 microg/mL for sulfamethoxazole and 2.00 microg/mL for trimethoprim. The recovery was >99% for both compounds. This method enabled the detection of sulfamethoxazole and trimethoprim in plasma of patients after oral ingestion of their combined formulation. The present simple and rapid method is applicable to drug monitoring in immunocompromised patients who are taking the combined formulation of these compounds for the treatment or prophylaxis of Pneumocystis carinii pneumonia.     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.     

Shear-thickening flow of nanoparticle suspensions flocculated by polymer bridging

The steady-shear viscosity, dynamic viscoelasticity, and stress relaxation behavior were measured for suspensions of silica nanoparticles dispersed in aqueous solutions of poly(ethylene oxide) (PEO). The suspensions of silica with diameters of 8-25 nm show striking shear-thickening profiles in steady shear and highly elastic responses under large strains in oscillatory shear. Since the silica particles are much smaller than the polymer coils, one molecule can extend through several particles by intrachain bridging. Each polymer coil may remain isolated as a floc unit and the silica particles hardly connect two flocs. Therefore, the flow of suspensions is Newtonian with low viscosity at low shear rates. When the polymer coils containing several nanoparticles are subjected to high shear fields, three-dimensional network is developed over the system. The shear-thickening flow may arise from the elastic forces of extended bridges. But, the polymer chain is easily detached from particle surface by thermal energy because of large curvature of particles. As a result, the network structures are reversibly broken down in a quiescent state and the suspensions behaves as viscoelastic fluids with the zero-shear viscosity.     

Effects of dioctadecyl dimethyl ammonium chloride on the rheological behavior of behenyl trimethyl ammonium chloride/1-hexadecanol/water ternary system

The effects of dioctadecyl dimethyl ammonium chloride (DODAC) on the rheological properties of ternary systems consisting of behenyl trimethyl ammonium chloride (C22TAC), 1-hexadecanol (C16OH), and water are studied to improve the long-term stability and to establish the preparation method of cosmetic products. The basic ternary systems behave as solids at low stresses, due to the formation of lamella liquid crystals called alpha gel. The additions of DODAC to ternary systems cause the rupture of alpha gel structures and transformation to vesicles. The structures of molecular assemblies are confirmed through particle size distribution, differential scanning calorimetry, and freeze fracture electron microscopy. The vesicle structures formed in coexistence of single-chain surfactant and double-chain surfactant are highly stable. Because the quaternary systems are considered to be constructed by the mixtures of alpha gel and vesicles at the appropriate concentrations of DODAC, the rheology can be controlled by the structural balance between them.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Electronic structures of I2− and I4− ions in γ-irradiated rigid solutions

Radical-anions of iodine, bromine, and monoiodochloride are produced in γ-irradiated amorphous solids at 77 K, and their electronic and ESR spectra measured. On limited warming of the irradiated solution dimerization by the reaction I₂^? + I₂ → I₄^? occurs to produce the same species as reported by Fornier de Violet et al. The electronic structure of the dimeric anion is discussed in comparison with the monomeric anion.     

Optical and electronic properties of siloxane-bridged cyclic dimers with naphthylene or pyrenylene moieties

The optical and electronic properties of novel siloxane-bridged cyclic dimers with naphthylene (CD1) or pyrenylene (CD2) moieties are described. CD1 and CD2 were obtained by the cyclic dimerization of 1,4-bis(dimethylhydroxysilyl)naphthalene (M1) and 1,6-bis(dimethylhydroxysilyl)pyrene (M2), respectively. CD1 and CD2 mainly exhibited the emission from their excimers owing to their short distances between aryl moieties in CD1 and CD2, which were determined to be 3.44 Å and 3.41 Å by the X-ray crystallographic analysis, respectively. The absorption spectra of CD2 in the presence of 7,7,8,8-tetracyanoquinodimethane (TCNQ) revealed that CD2 has the ability to form 1:1 charge-transfer complex with TCNQ, indicating the existence of the transannular π-π interaction between closely located pyrene components in CD2.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.     

Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.